Operating
_33
CHAnGinG tHE intERioR LiGHts
02
o
PERA
tin
G
Changing the interior Light in the Refrigerator
1. Unplug the power cord from the outlet.
2. Pull the shield down while pushing it backwards to remove it.
3. Turn the bulb counterclockwise.
4. Assembly is the reverse order of disassembly.
CAution
Before changing any of interior lights, unplug the Refrigerator from the power supply. If you are unsure
about changing the lights after reading through these directions, contact your service center for help.
Replacement bulbs for both freezer and fridge are available from your local home improvement or
electronics store. Use replacement bulbs with size E26, maximum 60 watts.
Changing the interior Light in the Freezer Drawer
1. Unplug the power cord from the outlet.
2. Pull drawer out to full extension.
3. Pull the shield down while pushing it backwards to remove it.
4. Turn the bulb counterclockwise.
5. Assembly is the reverse order of disassembly.
CAution
Do not place your fingers inside the cover. The lamp may be hot.
Summary of Contents for RFG297ACRSXAC
Page 1: ...RFG297ACRSXAC ...
Page 36: ...circuit diagram 36_ Circuit diagram ...
Page 38: ...RFG297ACRSXAC ...