26
DISASSEMBLY AND REASSEMBLY
3-7. Water-Dispenser
Part Name
Description
Figure
Water-Dispenser
Disengage the Housing Connectors by
pushing a flatblade screwdriver.
Remove 2 screws of the Case Ice Route
Assy.
Pull the Case Ice Route Assy.
Assembly shall be in order from the
disassembly. Case-Ice and Route shall be
assembled inside of hose.
Otherwise, assemble cannot be
accomplished.
When assembling Cover-Display, first insert
it from lower and then assemble to upper.
(Check the wire inside.) and knock the display
into the Case dispenser.
After leveling, check the dispenser (water
supply, operation of auger motor) for pushing
lever dispenser.