35
DISASSEMBLY AND REASSEMBLY
Part Name
Description
Figure
Door
With the Door closed, remove the door from
Remove the Upper Hinge with handling Wires.
Remove the door from the lower hinge by
lifting up the door straight.
CAUTION
Be careful not to pinch the water
tubing and the wire harness on the
door.
Lift up the door straight in upper
direction until the water hose is
eliminated from lower hinge.
Do not pull the door forward to
remove it. It cause injury of water
hose and tubing.
Part Name
Description
Figure
Reassembly
doors
• The Water Line must be fully inserted to the
center of transparent coupler (Type A) or the
line (Type B) to prevent water leakage from
the dispenser.
• Insert the clip in the install pack and check
that it holds the line firmly.
Center of Transparent coupler
clip A (1/4”)
(6.35mm)
Type A
The Guide Lines
Dispenser
clip A (1/4”)
(6.35mm)
Type B
