5
1. PRECAUTIONS (SAFETY WARNINGS)
O
Unplug the appliance before the changing or repairing the electric parts.
O
Use rated electronic Control equipment.
¬
Make sure to check out ModeL name, Rated voltage, Rated current,
Operation Temp, etc.
O
Upon repair, make sure that harnesses are not to be water-penetrated and
are bundled tight.
¬
Should not be detached by a certain amount of external force.
O
Upon repair, completely remove dust or other foreign substances from
housing, harness, connector, etc.
¬
To prevent fire by tracking, short, etc.
O
Check out whether water has penetrated into the electronic Control system.
¬
If there is any kind of trace, take necessary measures such as related
component change, insulation tapping, etc.
O
After repair, check out the assembled state of parts.
¬
It should be the same as the previous state.
O
Check out the surrounding conditions.
¬
Change the location, if the fridge is located at humid, wet places or the
installed state is unstable.
O
In order to reduce the risk of electric shock the appliance must be properly
grounded.
O
Do not allow consumers to overload a certain outlet.
O
Check out whether the power cord or the outlet is broken, squeezed,
chopped off or heatdeformed.
¬
Repair or replace the defective power cord/outlet immediately.
¬
Make sure the power cord is not punctuated or stomped down.
O
Do not allow consumers to keep food frayed or place bottles in the Freezer Room.
O
Do not allow consumers to repair the fridge by themselves.
O
Do not allow consumers to keep things except for food.
¬
Pharmaceutical, Chemical substances : These are not possible to be fine-
Controlled with a consumer fridge.
¬
Flammable material (alcohol, benzene, ether, LPG, etc) : possibility of
explosion.