29
AA
The following accessories are supplied with the indoor unit.
The type and quantity may differ depending on the specifications.
Accessories
User & Installation
manual
Insulation cover
pipe in
Insulation cover
pipe out
Insulation drain
Insulation cover
drain
Insulation pipe
Cable tie
Flexible hose
Clamp hose
Selecting the installation location
There must be no obstacles near the air inlet and outlet.
Install the indoor unit on a ceiling that can support its weight.
Maintain sufficient clearance around the indoor unit.
Make sure that the water dripping from the drain hose runs away correctly and safely.
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10 or thicker
insulation. Otherwise, there can be air leak or dew from the connection part.
Rigid wall without vibration.
Where it is not exposed to direct sunshine.
Where the replacement parts. (air filter, heat exchange element, humidifier element) can be removed and cleaned easily.
Space Requirements
Model
'A'
'B'
'C'
'D'
'E'
RHF050KHEA
1000
1553
600
200
450 x 450 or more
RHF100KHEA
1135
1763
800
300
550 x 550 or more
Inspection hole('E'mm)
for DX-COIL, Humidifier element
Inspection hole('E'mm)
for filter, heat exchange element, fan,
motor and damper
'B
' m
m
'A' mm
'D'
m
m
Return Air
Exhaust Air
Supply Air
Outdoor Air
'C' mm
ENGLISH
RHF050KHEA_IB,IM_E_32885-3.indd 29
2011-10-12 오후 5:30:30
