Samsung RL56GPGBP, User Manual

10_

Operating

cHEcKING THE cONTROl pANEl

Each time you press the button, a short 
beep will sound.

1

Fridge

Press the Fridge button to set the fridge to desired 

temperature from the range between 1°C and 7°C. 

Default set temperature is set on 3°C and each 

time you press the Fridge button, temperature 

will change in following order and temperature 

indicator will display the desired temperature.

(TYpE A, b)

(TYpE c)

Press and hold this button for 3 seconds to 
activate the Vacation function.

(TYpE A) 

2

Freezer

Press the Freezer button to set the freezer to desired 

temperature from the range between -17°C and -23 

°C. Default set temperature is set on -20°C and each 

time you press the Freezer button, temperature will 

change in following order and temperature indicator 
will display the desired temperature. 

(TYpE A, b)

-20

-2

-22

-2

-2

-2

-

-

-

-

-

-

(TYpE c)

   Fridge or Freezer temp indicator will blink 

when temperature in the fridge or freezer 

compartment goes up dramatically by 

storing warm food or frequent door opening. 

(Fridge or Freezer temperature indicator will stop 

blinking when temperature in the fridge or freezer 

becomes normal. If temperature indicator does 

not stop blinking after several hours, please 

contact your service center. 

Press this button for 3 seconds to activate the 

Power Freeze function. Power Freeze indicator

(

) will light up and the refrigerator will speed up 

the time to needed to freeze products in the

freezer. This function will be activated for 72 hours 

and freezer indicator will display -23°C. This

function switches off automatically. When the 

Power Freeze process is completed, the Power

freeze indicator switches off and the freezer 

switches back to the previous temperature 

setting. When you use this function, the energy 

consumption will increase. To deactivate this

function, press the Freezer button for 3 seconds.

If you need to freeze large amount of food

stuff, activate Power Freeze function 
24 hours before.

3

Alarm

1. door alarm

Press this button to activate the Door alarm 

function. Alarm indicator (

) will light up and the 

refrigerator will alert you with alarm sound if the 

refrigerator door is kept open for longer than 2 

minutes. To deactivate the this function, press the 

Alarm button again.

2. Temperature Alarm 
    (For Rl60GQ**, Rl58GQ** models)

Press this button to activate the Temperature 

alarm function. The alarm indicator (

) will 

light up. If the freezer compartment is too warm 

because there has been a power failure, the signal 

of “- -” flashes on the display. When the Freezer 

button is pressed, the “warmest temperature”

which has reached in the freezer compartment is 

flashed on the display for five seconds. Then

the actual temperature is indicated. To deactivate 

the Temperature Alarm function, press the Alarm 

button again.

This warning may operate ;

• when the appliance is turned on

•  the freezer compartment is too warm due to a 

power failure

Operating your refrigerator

(TYpE A)

(TYpE b)

(TYpE c)

2

3

4

6

5

1

6