9
Mechanical Disassembly
Damper in the Refrigerator
1. Pull out the screw cap and remove the screw.
2. Remove the lamp cover by unlocking the tabs
and pulling the cover down.
3. Remove the screw at the cover damper.
4. Take off sensor and lamp wire connector located
on the upper liner.
6. Remove the damper from the refrigerator.
1. Pull out the Twin cool by unlocking the hooks.
The refrigerator thermistor is located inside of the
upper light cover of the refrigerator.
Twin cool in the Refrigerator
Refrigerator Thermistor
THERMISTOR
