Installation
English
42
Ins
tallation
STEP 7
Initial settings
By completing the following steps, the refrigerator should be fully functioning.
1.
Plug the power cord into the wall socket to turn the refrigerator on.
2.
Open the door, and check if the interior light lights up.
3.
Set the temperature of the freezer and the fridge.
- The recommended temperature for the freezer is 0 °F (-18 °C) and 37 °F (3 °C) for the
fridge.
4.
When the temperature of the freezer and the fridge reaches the set temperature, you
may change them to the desired temperature and use the refrigerator.
STEP 8
Final check
When the installation is complete, confirm that:
• The refrigerator is plugged into an electrical outlet and grounded properly.
• The refrigerator is installed on a flat, level surface with a reasonable clearance from the
wall or the cabinet.
• The refrigerator is level and is sitting firmly on the floor.
• The door opens and closes freely, and the interior light turns on automatically when you
open the door.
Untitled-3 42
2023-01-30 11:32:01
