English 29
Se
tting up
Leveling the refrigerator
Make sure the refrigerator is level so that you can make final adjustments.
Use a level to test if the refrigerator is level both side to side and back to front.
If the refrigerator is not level, you will not be able to get the doors perfectly even, which
may cause moisture condensation and increased energy bills.
NOTE
•
The front of the refrigerator is also adjustable.
Before levelling the refrigerator, remove the front leg cover.
Open both the freezer and refrigerator
doors.
Unscrew the three screws holding the front
leg cover in place by turning them counter-
clockwise.
When the screws are loose, remove the
front leg cover.
When the Freezer part is lower than the Fridge part.
Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the Freezer part.
Leg
Leg
Screw Driver
Insert a flat-blade screwdriver into a slot
on the Fridge Leg, then turn it clockwise.
NOTE
• Refer to the next section for the best
way to make very minor adjustments to
the doors.
DA68-02981N-00.indb 29
DA68-02981N-00.indb 29
2015. 3. 3.
9:34
2015. 3. 3.
9:34
Summary of Contents for RS25J500D
Page 119: ...Espa ol 59 Notas DA68 02981N 00 indb 59 DA68 02981N 00 indb 59 2015 3 3 9 34 2015 3 3 9 34...
Page 178: ...58 Fran ais Notes DA68 02981N 00 indb 58 DA68 02981N 00 indb 58 2015 3 3 9 34 2015 3 3 9 34...
Page 179: ...Fran ais 59 DA68 02981N 00 indb 59 DA68 02981N 00 indb 59 2015 3 3 9 34 2015 3 3 9 34...
