setting up_13
SETTING UP THE REFRIGERATOR(CONT’D)
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Tools you will need
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take o the front leg cover by turning the
three screws counter-clockwise.
Separating the water supply line from the refrigerator
1.
Remove the water tube by pressing the coupler
2
and pulling the water tube
1
away.
Reattaching the water supply line
1. While pressing the fr ont face of coupler
2
, insert the water line
1
in the coupler.
Car efully place front cover and push to
snap it into position.
2. Insert 1 clip in plastic bac and check that it
holds the line firmly
The water line must be fully inserted to
the marked line to pr event water leakage fr om the dispenser .
Do not cut the water line. Gently separate it fr om the coupler.
1
2
FRONT LEG COVER
SCREW
Philips Scr ewdriver
Flat-blade Scr ewdriver
10mm Socket W rench
1
2
Line
Line
Coupler
Coupler
Coupler
Clip A (1/4º )
01
SETTING UP