English 41
Operations
Setting up the refrigerator
Now that you have your new refrigerator installed and in place, you are ready to
set up and enjoy the full features and functions of the appliance.
By completing the following steps, your refrigerator should be fully
operational. If not, first check the power supply and electricity source or try the
troubleshooting section at the back of this user guide. If you have any further
questions, contact your Samsung Electronics service center.
1.Place the refrigerator in an appropriate location with reasonable clearance
between the wall and the refrigerator. Refer to installation instructions in this
manual.
2.Once the refrigerator is plugged in, make sure the interior light comes on
when you open the doors.
3.Set the temperature control to the coldest temperature and wait for an hour.
The freezer should get slightly chilled and the motor should run smoothly.
3.After powering the refrigerator, it will take a few hours to reach the
appropriate temperature.Once the refrigerator temperature is sufficiently
cool, you can store food and drink in the refrigerator.
USE ICE TRAY(OPTIONAL)
When the freeze temperature get zero degre below, you can use Ice Box to
make ice.
1.Pull out the ice
tray.
3.Place it inside ice
tray.
2.Pour cool water
into the tray
until it reaches
the water level
indicator on the
tray.
4.Turn ice tray
button and the
ice automatically
full into the below
ice compartment
after release. Pull
out ice storage
compartment for ice.
Operations
