operating
_25
Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about
every 6 months.
After removing the old water filter and installing a new one (see page
1
8 for instructions on how
to do this), reset the indicator status light by pressing the
Ice Type
button for about 3 seconds.
The indicator will light again in about 6 months to let you know it is time to change your water
filter.
When you do not use the water filter, press the Ice Type button for more than 5 seconds, the
Filter indicator lamp and the Filter Change letters will be off.
Child Lock
This icon will light up when you activate the Child Lock function by pressing the Power Cool
button and the Fridge button simultaneously for 3 seconds. Press these two buttons
for 3 seconds again to reactivate.
Cubed Ice, Crushed Ice and turnning the Ice maker off.
Enjoy cubed or crushed ice by selecting your preference
from the digital control panel. If you don’t need ice, turn
the feature off to save on water and energy consumption.
The Ice type light indicates the type of ice(or no ice) that is
currently chosen.
CONTROLLING THE TEMPERATURE
Controlling the Freezer temperature
The freezer temperature can be set between -14°C (8°F) and -25ºC (-14°F) to suit your particular
needs. Press the
Freezer
button repeatedly until the desired temperature is shown in the
temperature display. Keep in mind that foods like ice cream may melt at -16ºC (4°F).
The temperature display will move sequentially from -14°C (8°F) and -25ºC (-14°F). When the
display reaches -14ºC (8°F), it will begin again at -25ºC (-14°F).
Five seconds after the new temperature is set the display will again show the actual current
freezer temperature. However, this number will change as the Freezer adjusts to the new
temperature.
Controlling the Fridge temperature
The refrigerator temperature can be set between 7ºC (46°F) and 1ºC (34°F) to suit your particular
needs. Press the
Fridge
button repeatedly until the desired temperature is shown in the
temperature display.
The temperature control process for the Fridge works just like the Freezer process.
Press the
Fridge
button to set your desired temperature. After a few seconds, the Fridge will
begin tracking towards the newly set temperature. This will be reflected in the digital display.
The temperature of the freezer or the refrigerator may rise from opening the doors too
frequently, or if a large amount of warm or hot food is placed in either side.
This may cause the digital display to blink. Once the freezer and refrigerator return to their
normal set temperatures the blinking will stop.
If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the
appliance, wait about 10 minutes and then plug back in.
20
O
E
P
G
NI
TA
R
Ice type
Also,this button has another function.When this button is pressed for 3 seconds (lock
indication lamp turn on),the heater for sweat control is off at a same time.If sweat is
appeared around the cover dispenser or beverage station with this function,press this
button for 3 seconds again.then,the light will turn off and the sweat control function will be
performed.and all keys will be unlocked at a same time.
