background image

setting up

 

_13

01 SETTING 

up

•    Samsung Warranty does not cover WATER LINE 

INSTALLATION.

•   The cost of connection to a water supply is at the 

customer expense, unless included in the delivery 
charge (refer to the delivery agreement with the 
seller) 

•   Please contact Plumber or Authorised Installer for 

the installation if needed.

•   If Water leakage occurs due to improper 

installation, Please contact installer.

INSTAllING ThE WATER 

dISpENSER lINE

For Exterior model

Parts for water line Installation 

Connecting to the water supply line

Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler “A” to the tap.

select the location where the purifier is to 

install. (Model with the purifier)

-    If you wish to reassemble the water inlet and outlet 

sides of the purifier during purifier installation, see 
the reference illustration.

-    Cut the water line attached to the purifier to the 

appropriate place after measuring the distance 
between the purifier and the cold water tap.

Water line fixer and screws

Pipe connector

Water line

Purifier lock-clip

Purifier

CAUTION

The water line must be connected to the cold 

water pipe. If it is connected to the hot water 

pipe, it may cause the purifier to malfunction.

WARRANTY INFORMATION

This water line installation is not covered by the 
refrigerator or ice maker manufacturer’s warranty.
Follow these instructions carefully to minimise the risk of 
expensive water damage.

Note:

If the coupler does not fit on the current tap, go

the nearest authorised service dealer and purchase the 
right couplers fittings.

DA99-02318A(0.5).indd   13

2011.5.31   5:2:7 PM

DA99-02318A(0.5).indd   13

2011.5.31   5:12:38 PM

Summary of Contents for RSH5SBBP

























Reviews: