English
27
Installation
STEP 2
Flooring
• The surface to install the refrigerator
must support a fully loaded refrigerator,
or approximately 100 kg.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement
path.
STEP 3
Adjust the levelling feet
Level the refrigerator by manually
adjusting the levelling feet. Turn the
levelling feet clockwise to lower the
position, or turn counter clockwise to raise.
A
Leave the feet at least 35 mm
(A)
from the
floor as shown.
Untitled-9 27
2021-12-07 5:59:28