maintaining
_11
maintaining
_11
03 MAINT
AINING
Removing the ice cubes
1. Make sure that the ice
bin is in place under the
ice tray. If not, slide it
into place.
2. Twist one of the levers
fi rmly in the clockwise
direction until the tray
twists slightly. The
ice cubes fall into the
storage bin.
3. Repeat Step 2 for the other half of the tray, if
necessary.
4. To get ice, slightly lift up the ice tray and pull it
towards you.
Making ice cubes
1. Remove the ice cube
tray by pulling it towards
you.
2. Fill the tray with water up
to the maximum water
level marked on the tray.
3. Slide the tray back into
the holder, taking care
not to spill the water.
4. Wait until the ice cubes
are formed.
Freezing time
It is recommended that you wait for about
one hour with the temperature set to Power
Freeze for the ice cubes to form.
Twist ice maker
Slightly lift up the twist
ice maker and pull it
towards you.
Boxes
Pull the boxes out fully
then slightly lift it up to
remove the boxes. (Small
box/Fresher box/Big box)
Tempered glass shelf
Gently lift up the shelves
with both hands and pull
it toward you.
REMOVING THE INTERIOR
PARTS
Some of the features can be different and
may not be available depending on the model.
Top shelf cover
1. Push the right side of
cover inward until you
can get the projection
on the left side out.
2. When both sides of
the projections are out
of the grooves, pull it
towards you to remove the cover.
Make sure that you remove the top shelf
cover when you assemble or disassemble the
glass shelf.
maintaining your freezer
XBUFS
MFWFM
DA99-01951G.indb 섹션6:11
DA99-01951G.indb 섹션6:11
2012.6.1 2:20:41 PM
2012.6.1 2:20:41 PM
Downloaded from Fridge-Manual.com Manuals
