•
At this time, the LCD & touch screen are
fused
together and cannot be separated. They are
secured to the frame of the phone using a lot of
adhesive that will require heat and patience to
separate. This procedure is recommended only on
phones with CRACKED or ALREADY BROKEN
screens that require replacement. The separation of
the LCD & touch screen digitizer could cause
damage to a perfectly working LCD or touch screen.
Step
Step
Step
http://www.fixez.com/
Page
RI
10
•
With the plastic opening tool, find the seam of where
the display assembly meets the frame. Slip the
opening tool in this seam and pry the two pieces
apart. Work your way around the entire display
assembly until they are separated.
•
With enough patience, the assistance of the heat
gun/blow drier, and the plastic opening tool, you will
be able to successfully separate the display
assembly from the phone’s frame for replacement.
Samsung S III
–Disassemble Guide
•
Use the heat gun/blow drier to begin heating the
adhesive securing the LCD & touch screen digitizer
assembly to the phone’s frame.
This will loosen the
connection of the two.
