78
Setup and Reset
6
6 Setup and Reset
6.7
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
The functions available on the monitor may vary depending on the model. Refer to the actual product.
6.7.1
Configuring Power LED On
1
When the Function Key Guide appears, select [
] by pressing [
] button on the DOME Type JOG
Button.
Next, press the [
] button.
2
Press [
] button to move to
SETUP&RESET
and press [
] button on the monitor.
3
Press [
] button to move to
Power LED On
and press [
] button on the monitor.
The following screen will appear.
Working
: The power LED is on when the product is turned on.
Stand-by
: The power LED is on when the product is turned off.
4
Move the focus to the desired option by pressing [
] button on the DOME Type JOG Button.
Press [
] button.
5
The selected option will be applied.
SETUP&RESET
Off
Auto
Working
Stand-by
Reset All
Eco Saving Plus
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Power LED On
Set the status of the
power LED.
