3.4.1
Configuring Eye Saver Mode
1
When the Function Key Guide appears, select [
] by pressing [
] button on the DOME Type JOG
Button.
Next, press the [
] button.
2
Press [
] button to move to
PICTURE
and press [
] button on the monitor.
3
Press [
] button to move to
Eye Saver Mode
and press [
] button on the monitor.
The following screen will appear.
4
Move the focus to the desired option by pressing [
] button on the DOME Type JOG Button.
Press [
] button.
5
The selected option will be applied.
SAMSUNG
M A G I CBright
SAMSUNG
M A G I CAngle
Set to an optimum
picture quality suitable
for eye relaxation.
100
75
60
Off
Off
Custom
Off
Off
On
Brightness
Contrast
Sharpness
Eye Saver Mode
Game Mode
PICTURE
PICTURE
SAMSUNG
M A G I CBright
SAMSUNG
M A G I CUpscale
Set to an optimum
picture quality suitable
for eye relaxation.
100
75
60
Off
Off
Custom
Off
Off
On
Brightness
Contrast
Sharpness
Eye Saver Mode
Game Mode
45
Screen Setup
3
3 Screen Setup
3.4
Eye Saver Mode
The functions available on the monitor may vary depending on the model. Refer to the actual product.
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for lower
blue light levels. When
Eye Saver Mode
is '
On
', the blue light that wavelength is around 400nm will
decrease, and it will provide an optimum picture quality suitable for eye relaxation.
At the same time, the
blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and certified as it
met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
