background image

15

Connecting and Using a Source Device

Chapter  03

Read below before connecting the product.

Before connecting the product, check the shapes of both ports of the supplied signal cables and 
the shapes and locations of the ports on the product and external device.

Before connecting the product, make sure you remove the power cables from both the product and 
the external device to prevent damage to the product due to a short circuit or over current.

After all signal cables have been properly connected, connect the power cables back to the product 
and the external device.

After connecting is completed, make sure you read the manuals to acquaint yourself with the 
product functions, precautions and other information required to use the product properly.

 

Connecting parts may differ in different products.

 

Provided ports may vary depending on the product.

Ports

 

The functions available may vary depending on the product model. The colour and shape of parts may 
differ from what is sho

wn. Specifi

cations are subject to change without notice to improve quality. Refer to 

the actual product.

HDMI

D-SUB

DC 14V

Port

Description

HDMI 

Connects to a source device using an HDMI cable or HDMI-DVI cable.

D-SUB

Connect to a PC using the D-SUB cable.

DC 14V

Connects to the AC/DC adapter.

Summary of Contents for S24A312NHU

































Reviews: