background image

7

Caution

 • Leaving the screen fixed on a stationary image for an extended period of time may cause 

afterimage burn-in or defective pixels.

 

‒ Set the screen to power-saving mode or moving-picture screen saver when not using the 

product for an extended period of time.

• – Otherwise, a fire may result.
• • Keep the AC/DC adapter in a well-ventilated area.
• • If you place the AC/DC power adapter hanging with the cord input facing upwards, water or 

other 

• foreign substances could enter the Adapter and cause the Adapter to malfunction. 
• Make sure to rest the AC/DC power adapter flat on a table or the floor

Cleaning

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used 
nearby.

 

― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product 

(Service fee will be charged.)

Do not press the product screen with hands or other objects. There is a risk of damaging the screen.

 

― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

Power off the product and PC.

Disconnect the power cord from the product.

 

― Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric 

shock may result.

Wipe the product with a clean, soft and dry cloth.
Wet a soft cloth in water, wing it out well, and then use the cloth to wipe the exterior of the product 
clean.

 

‒ Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the product.

 

‒ Do not spray water or detergent directly on the product.

Connect the power cord to the product when cleaning is finished.

Power on the product and PC.

• Disconnect the power cord from the power socket if you do not plan on using the product for an 

extended period of time (vacation, etc).
‒  Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.

• Use the product at the recommended resolution and frequency.

‒  Your eyesight may deteriorate.

• Do not hold the product upside-down or move it by holding the stand.

‒  The product may fall and become damaged or cause an injury.

• Looking at the screen too close for an extended period of time can deteriorate your eyesight.

• Do not use humidifiers or stoves around the product.

• Rest your eyes for more than 5 minutes or look at distance objects for every 1 hour of product use.

• Do not touch the screen when the product has been turned on for an extended period of time as 

it will become hot.

• Store small accessories out of the reach of children.

• Exercise caution when adjusting the product angle or stand height.

‒  Your hand or finger may get stuck and injured.
‒  Tilting the product at an excessive angle may cause the product to fall and an injury may 
result.

• Do not place heavy objects on the product.

‒  Product failure or personal injury may result.
Do not put AC/DC adapters together.

• Remove the plastic bag from the AC/DC adapter before you use it.

• Do not let water enter the AC/DC adapter device or get the device wet.

‒   An electric shock or fire may result.
‒   Avoid using the product outdoors where it can be exposed to rain or snow.
‒   Be careful not to get the AC/DC adapter wet when you wash the floor.

• Do not put the AC/DC adapter near to any heating apparatus.

Summary of Contents for S24C33 Series






































Reviews: