26
3
Select the product from
Display
under
Display options
. Next, select
Calibrate
.
4
Perform calibration following the onscreen instructions displayed as shown in the image.
To provide calibration samples, tap the crosshair each
time that it appears on the screen.
Right-click anywhere on the screen to return to the
last calibration point. Press the Esc button to close
the tool. Do not change your screen orientation until
you have completed the calibration process.
5
After calibration is complete, the message
Do you want to save the calibration data?
appears.
Select
Yes
to save changes.
Digitizer Calibration Tool
Yes
No
Do you want to save the calibration data?
6
The touchscreen monitor has been calibrated successfully.
―
Selecting
Reset
will remove the calibration data.
