30
2nd
3rd
Description
Input Port Ver.
Select an HDMI version. (
1.4
/
2.0
)
―
The supportable device and resolution may differ depending on its version.
―
When the version is changed, the screen may blink.
―
If you set the
HDMI Mode
to
1.4
, some high resolutions may not be supported because of bandwidth limitation of the HDMI 1.4 protocol.
―
When the setting is not appropriate, a blank screen may appear. In this case, check the specifications of the device.
―
Set
HDMI Mode
to
1.4
if the monitor is connected to an HDMI device and the monitor does not display the screen properly, displays a blank screen, or does
not play sound at all.
Auto Source
By activating, a new connected source is displayed automatically.
―
This function may not be supported depending on the model or geographical area.
Key Repeat Time
Control the response rate of a button when the button is pressed.
Acceleration
,
1 sec
, or
2 sec
can be selected. If
No Repeat
is selected, a command responds only once when a button is pressed.
Power LED On
Configure the settings to enable or disable the power LED located at the lower part of the product.
•
Working
: The power LED is on when the product is turned on.
•
Stand-by
: The power LED is on when the product is turned off.
Setup Custom Key
Set the custom key so that your chosen function can be set up directly.
•
Eye Saver Mode
/
Refresh Rate
/
Ultrawide Game View
/
Low Input Lag
/
Black Equalizer
/
Virtual Aim Point
/
Auto Source
/
Picture
Mode
/
Response Time
Eco Sensor Mode
Optimizes brightness in real time, based on your lighting environment.
―
This menu is not available when
Adaptive Picture
is enabled.
