17
HDMI IN
DP IN
1
Connect the power cable to the AC/DC adapter. Then, connect the AC/DC adapter to the DC14V/DC 19V
port on the back of the product.
2
Next, connect the power cable to the power outlet.
3
Press the JOG button at the bottom of the product to turn it on.
― The input voltage is switched automatically.
Connecting the Power
Tidying Up the Connected Cables
Connect the corresponding cables.
Pull the right side of the HOLDER-STAND CABLE
to remove from the stand. The left side of the
HOLDER-STAND CABLE can be damaged when
pulled forcibly.
Put both cables in the cable holder on the stand
(HOLDER-STAND CABLE) to organize the cables,
as shown in the figure.
Assembly is complete.
1
2
3
S32AG32*
DC 14V
S24AG32* / S27AG32*