background image

28

System

2nd

3rd

Description

FreeSync

FreeSync

 technology is solution that eliminates screen tearing without all the usual lag and latency. 

FreeSync

 can be operated when you use 

AMD's graphic card with supporting 

FreeSync

 solution.

For more information, see 

FreeSync

 page.

Volume

Change the 

Volume

 setting.

 

֜

Excessive sound pressure from ear-/headphones can cause hearing damage/hearing loss.

Eco Saving Plus

Reduce energy consumption compared to consumption at the maximum brightness level.

• 

Off

: Deactivate the 

Eco Saving Plus

 function.

• 

Auto

: The power consumption will automatically be reduced by about 10% over the current setting.

 

(The reduction of power consumption depends on the customer screen brightness condition.)

• 

Low

: Saves up to 25 % energy compared to the maximum brightness.

• 

High

: Saves up to 50 % energy compared to the maximum brightness.

 

֜

This option is not available when 

Picture Mode

 is in 

Dynamic Contrast

 mode.

 

֜

This menu is not available when 

Game Mode

 is enabled.

 

֜

This menu is not available when 

Eye Saver Mode

 is enabled.

Summary of Contents for S27C36 Series










































Reviews: