background image

User Manual

The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior 
notice to improve the performance.

The contents of this manual are subject to change without notice to improve quality.
© Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Trademarks other than that of Samsung Electronics are owned by their respective owners.

S*R35*

An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e., where the user manual 
has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the user manual has 
not been read).
You will be informed of the administration fee amount before a technician visits. 

Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per 

Samsung SR350 27"

(LS27R350FHUXEN)

 o cerca il tuo prodotto tra le 

migliori offerte di Monitor

Summary of Contents for S27R350FH Series












































Reviews: