background image

ŝ

74

Ş

Digimax Master

ƃ

Image viewer : You can view the stored images.

ڹ

ڽ
ھ

ڿ

ں

ڻ

ڼ

- Image viewer functions are listed below.

ڹ

Menu bar : You can select menus.
File, Edit, View, Tools, Change functions, Auto download, help, etc.

ں

Image selection window : You can select the desired images in this window.

ڻ

Media type selection menu : You can select image viewer, image edit and

movie edit functions in this menu.

ڼ

Preview window : You can preview an image or a movie clip and check the

multi media information.

ڽ

Zoom bar : You can change preview size.

ھ

Folder display window : You can see the folder location of the selected

image.

ڿ

Image display window : Images of the selected folder are displayed.

ſ

Refer to the [Help] menu in Digimax Master for further information.

4. Select a destination and make a folder to

save downloaded images and folders.

- Folder names can be made in order of date

and images will be downloaded.

- Folder name will be made as you want and

images will be downloaded.

- After selecting a folder that was made

before, images will be downloaded.

5. Click [Next >] button.

6. A window will open as shown alongside.

The destination of the selected folder will be
displayed on the upper side of the window.
Click the [Start] button to download the
images.

7. Downloaded images will be displayed.

Summary of Contents for S830



















































































Reviews: