ENG
SADT-100EC_
3
4.
Insert necessary wiring including the external power cable, video out cable and alarm I/O
cable into the side hole of the adaptor.
See the installation guide for the applicable camera, and arrange necessary cables for the
installation in advance.
5.
Screw the anchor bolt (B1) into the ceiling mount adaptor.
Insert the adaptor through the hole inside the ceiling.
Then push the anchor bolt fixing hole into the ceiling so that it fits the anchor bolt (B1).
Turn the three screws on the ceiling mount adaptor clockwise to secure the adaptor to
the ceiling board. (The bracket is moved from A to B.)
Turn to the clockwise
“B1”
“B2”
“N1”
HOLE for fixing a anchor bolt
CEILING B/D
CEILING MOUNT ADAPTOR
BRACKET
CEILING B/D
SCREW for fixing a ADAPTOR
SADT-100EC_ENG.indd 3
2008-01-23 오후 4:14:38
