8
_SADT-100EC
.
Insert the provided screw (M3×L6, included in camera product) into the fixing hole of the
lever lock and fix it.
Once you removed the camera from the camera adaptor, loosen the screw (BH M3xL6).
With the lever lock turned clockwise, turn the camera counter clockwise and then pull it
down.
3.
Insert the cover body into the dome of the camera.
Make sure that the 9 snap pits fit into the corresponding holes of the ceiling mount.
CEILING MOUNT ADAPTOR
CONNECTING HOLE
SNAP-FIT
COVER BODY
SADT-100EC_ENG.indd 8
2008-01-23 오후 4:14:48
