ENG
SADT-103WM_
5
If you use only the Grand Cable to fix the cables to the Cover Plate, the other hole of
the Cover Plate should be sealed up with the Rubber Cap for waterproofness.
The different cables on the Cover Plate can be pulled out through the hole of the Cover
Fixing Part of the Wall Mount Adaptor. 4) Then, use 6 screws (Flat, M3xL8) to fix the
Cover Plate to the Wall Mount Adaptor.
- Make sure that the Gasket part should keep contact with the Wall Mount Adaptor
during the fixation.
COVER PLATE
150 mm
CABLE GRAND
RUBBER CAP
WALL MOUNT ADAPTOR
The place for joining a COVER
GASKET
COVER PLATE
SCREW
SADT-103WM_ENG.indd 5
2008-03-18 오전 9:13:55
