ENG
SADT-104WM_
Overview
The WALL MOUNT ADAPTOR is used to install the SMARTDOME
CAMERA (SCC-C6433/C6435) in an indoor wall.
Notice
• Make sure that you must select an installation spot to endure the total weight of "Wall
Mount Adapter", "Smart Dome Camera".
• This product is designed to use with anchor bolts and anchor nuts (M10).
• If installing in a concrete wall, use a M10 anchor bolt (nut) with flat washer and spring
washer.
• Each installed anchor bolt should endure 700kg of pulling force.
• Wall Mount Adapter can be installed directly in the wall, and also attached to CORNER
MOUNT ADAPTOR(SADT-110CM), or POLE MOUNT ADAPTOR(SADT-100PM)
Installation
.
Select an installation spot which can endure more than 4 times of the product weight.
2.
Refer to the user guide of the SMARTDOME CAMERA, prepare the outdoor power cable,
BNC cable, communication cable to connect the Camera.
SADT-104WM_ENG.indd 1
2008-01-24 오전 10:24:03
