background image

51

51

ENGLISH

Advanced Recording

AUDIO MODE

The AUDIO MODE function works in CAMERA mode.

This camcorder records sound in two ways. (12bit, 16bit)

12bit : You can record two 12bit stereo sound tracks.

The original stereo sound can be recorded onto the MAIN (SOUND1) track. 
Additional stereo sound can be dubbed onto the SUB (SOUND2) track.

16bit : You can record one high quality stereo sound track using the 16bit recording mode. 

Audio dubbing is not possible when using this mode.

1. Set the camcorder to CAMERA mode.

2. Press the MENU button.

The menu list will appear.

3. Turn the MENU DIAL to highlight A/V and press the ENTER button.

4. Select the AUDIO MODE from the menu and press the ENTER button.

The AUDIO MODE toggles between 12bit-16bit with each push.

5. To exit, press the MENU button.

CAM  MODE

REC MODE
PHOTO SEARCH
PHOTO COPY
AUDIO MODE

12

SOUND[1]

AUDIO SELECT
WIND CUT

A / V SET

PB DSE

OUT

AV IN/OUT

CAM  MODE

INITIAL

WIND CUT
PB DSE

REC MODE
PHOTO SEARCH
COPY
AUDIO MODE

12

OUT

AUDIO SELECT

CAMERA
A/V
MEMORY
VIEWER

AV IN/OUT

00762B SCD107 SEA (28~59)  3/8/04 9:19 AM  Page 51

Summary of Contents for SC-D107


















































































































Reviews: