14
_ English
Use the IA-BP80WA battery pack only.
The battery pack may be charged a little at the time of purchase.
Be sure to charge the battery pack before you start using your miniDV camcorder.
Inserting / Ejecting
the battery pack
1.
Open the LCD screen as shown in the fi gure.
2.
Insert the battery pack into the battery pack slot until it softly clicks.
• Make sure that word mark (SAMSUNG) is facing out while
the camcorder is placed as shown in the fi gure.
3.
Slide the
BATT.
release switch and pull out the battery pack.
• Gently slide the
BATT.
release switch in the direction as
shown in the fi gure.
• Additional battery packs are available at your local Samsung dealer.
• If the miniDV camcorder will not be in use for a while, remove the battery
pack from the miniDV camcorder.
Charging the Battery Pack
1.
Slide the
POWER
switch downwards to turn off the power.
2.
Insert the battery pack to the camcorder.
3.
Open the jack cover and connect the AC power adaptor to the DC IN jack.
4.
Connect the AC power adaptor to a wall socket.
5.
Once charged, disconnect the AC power adaptor from the DC IN jack on your
camcorder.
• Even with the power switched off, the battery pack will still discharge
if
it is left inserted in the camcorder.
It is recommended that you purchase one or more additional battery packs
to allow continuous use of your miniDV camcorder.
•
•
•
USING THE BATTERY PACK
Use only Samsung-approved battery packs. Do not use batteries from other manufacturers.
Otherwise, there is a danger of overheating, fi re or explosion.
Samsung is not responsible for problems occured due to using unapproved batteries.
preparation
Insert
Eject
P
O
W
E
R
BATT.
P
OW
E
R
BATT.
P
O
W
E
R
C
H
BATT.
BATT.
PO
W
ER
C
H
BATT.
