Ajuste de la LCD durante la REPRODUCCIÓN
✤
Es posible hacer ajustes en la LCD durante la reproducción.
✤
El método de ajustes es el mismo que se emplea en la
modalidad CAMERA (ver pág. 30).
El altavoz sólo funciona en la modalidad PLAYER.
■
Cuando se usa la pantalla LCD para la reproducción
se puede oír el sonido a través del altavoz
incorporado.
-
Para bajar el volumen o para eliminar el sonido
del altavoz en la modalidad PLAYER, siga las
instrucciones que aparecen a continuación.
1. Ajuste el interruptor en la posición PLAYER.
2. Pulse el botón
(PLAY/STILL) para empezar la
reproducción de la cinta.
3. Al oír los sonidos una vez que la cinta esté en
marcha, ajuste el volumen mediante el
SELECTOR MENÚ.
■
Aparece en la LCD el nivel de volumen.
Se pueden ajustar niveles desde 00 hasta 19.
Si el volumen está ajustado en 00 no se oirá nada.
■
Es posible ajustar el volumen de los auriculares
de manera independiente del volumen del
altavoz incorporado.
■
Si cierra la pantalla LCD durante la reproducción,
no se oirá ningún sonido por el altavoz.
Notas
■
A veces, si el volumen es demasiado alto, el sonido puede resultar
distorsionado. En este caso, disminuya el volumen.
■
El altavoz se apaga cuando se conectan unos auriculares.
Control del sonido desde el altavoz
33
33
ESPAÑOL
Basic Recording
Grabación básica
ENGLISH
Adjusting the LCD during PLAY
✤
You can adjust the LCD during playback.
✤
The adjustment method is the same procedure as used in
CAMERA mode. (see page 30)
The Speaker works in PLAYER mode only.
■
When you use the LCD screen for playback,
you can hear the recorded sound from the built-in
Speaker.
-
Follow the instructions below to decrease or mute
speaker volume in the PLAYER mode.
-
Take the following steps to lower the volume or
mute the sound while playing a tape on the
PLAYER.
1. Set the power switch to PLAYER mode.
2. Press
(PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play, use the
MENU SELECTOR to adjust the volume.
■
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between 00
to 19 and you will not hear any sound when the
volume is set on 00.
■
You can adjust the headphone volume separately
from the built-in speaker.
■
If you close the LCD while playing, you will not hear
sound from the speaker.
Notes
■
Sometimes audio may sound distorted when the volume is turned up
high. If this happens, turn down the volume.
■
The speaker turns off when you use headphones.
F
ADE
S
.SHO
W
DELETE
BLC
F
ADE
BLC
0 : 2 3 : 4 7 : 2 0
5 5 min
10:00 PM
JAN. 1, 2002
VOL.
[ 1 1 ]
2
3-1
<3-2>
Controlling Sound from the Speaker