English 19
A
PPENDICES
Troubleshooting
Symptom
Checklist
Motor does not start.
• Check the cable, the power plug and outlet.
Suction force is gradually
decreasing.
• Check if there is any blockage, and remove it if required.
• Please check the filters, and if required, clean as illustrated
in this manual.
– If filters are out of condition, replace them with new
ones.
Cord does not rewind
fully.
• Pull the power cord out 2 - 3 m and press the Cord rewind
button.
Body overheating
• Check the filters, and clean as illustrated in this manual if
required.
Static electricity
discharge.
• Reduce suction.
• This may also occur when air in the room is very dry.
Ventilate the room so that air humidity becomes normal.
During using, stop the
unit.
• This vacuum cleaner has a special thermostat that protects
the motor in case of its overheating. If the vacuum cleaner
suddenly shuts off, turn off the switch and unplug the
vacuum cleaner. Check the vacuum cleaner for possible
source of overheating such as a full dust tank, a blocked
hose, pipe, or clogged filter. If these conditions are found,
fix them and wait at least 30 minutes before attempting to
use the vacuum cleaner.
1_VC2500_EN_00759C-00_Global_AP.indd 19
2017-01-10 오후 5:19:04
