14_
troubleshooting
pROblem
sOlUTION
Motor dows not start.
• Check cable, pulg and socket.
• Leave to cool.
Suction force is gradually
decreasing.
• Check for blockage and remove.
cord does not rewind fully.
• Pull the cord out 2-3m and push down the
cord rewind button.
Vacuum cleaner dows not pick up
dirt.
• Check hose and replace if required.
low or decreasing suction
• Please check filter and, if required, clean as
illustrated in the instructions. if filters are out
of condition change them to new ones.
body overheating
• Please check filters, If required clean as
illustrated in the instruction.
Static electicity discharge
• Please decrease power suction.
This Vacuum cleaner is approved the following.
EMc Directive : 2004/108/EEc
low Voltage Directive : 2006/95/Ec
troubleshooting
DJ68-00461A(0.1)-EN.indd 14
2009.8.27 6:52:20 PM
