6
CLEANING THE INLET FILTER
7
OUTLET FILTER
1
2
3
PROBLEM
CAUSE
REMEDY
0
- IF YOU HAVE A PROBLEM
Motor does not start.
No power supply.
Thermal cut-out.
Check cable, plug and socket.
Leave to cool.
Suction force is gradually
decreasing.
Nozzle, suction hose or tube
is blocked.
Remove the object and
empty/wash cassette filter as
required.
Cord does not rewind fully.
Check that the cord is not
twisted or wound unevenly.
Pull the cord out 2-3m and
push down the cord rewind
button.
Vacuum cleaner does not
pick up dirt.
Crack or hole in hose.
Check hose and replace if
required.
NOTE :
Do not allow the filter to become clogged as this may cause power reduc-
tion or may damage the motor.
1
2
EN-6
DJ68-00273R(TR+EN)-0.0 5/17/05 10:05 AM Page 14
