5
4
CHANGING THE DUST BAG
3
LAMP SIGNALS
1)BODY-CONTROL TYPE
Check the Dust bag and change it.
(Check the Dust bin and empty it.)
2)REMOTE-CONTROL TYPE
Check the Dust bag and change it.
(Check the Dust bin and empty it.)
*
LAMP SIGNALS
1. INDICATOR LAMP ON:
The dust bag is full, or the pipe is blocked.
2. POWER LAMP ON:
The power is applied to the vacuum cleaner
1
3
4
2
5
INDICATOR
LAMP
INDICATOR
LAMP
POWER
LAMP
OPTIONAL
●
FOR CLOTH BAG
After using, if the cloth bag is full of dust, clean the cloth bag and use it again.
NOTE
Please make sure to retain the support-filter when you dispose of the dust bag.
NOTE
A used dust bag can be sealed by removing the paper from the adhesive strip and
sealing the strip over the hole.
DJ68-00208A(EN)REV(0.0) 5/16/03 11:46 AM Page 8