Samsung SCB-3020, User Manual

28

 – 

High Resolution Compact ATM Camera

How to use OSD Menu

29

How to use OSD Menu

Note :

You can set the values of R-GAIN and B-GAIN only in AWC 
mode.

If AGC is set to OFF or FIX, you can not access the NIGHT 
menu.

For adjusting the white balance, the following 5 
modes are provided:

ATW1

(Auto Tracing White Balance mode 1): 

The camera can automatically adjust the color 
temperature in real time, according to the ambient 
conditions. The color temperature ranges from 
approx. 2500K to 9300K.

ATW2

: The color temperature ranges from 

approx. 2,000K to 10,000K.

AWC

 ( Auto White Balance Control): If you 

press the 

SETUP

 switch in the appropriate item 

position, Auto White Balance will perform once.

3200K : Set color temperature to 3200K

5600K : Set color temperature to 5600K

RED : 

Adjusts the strength of the red color.

BLUE : 

Adjusts the strength of the blue color.

R-GAIN/B-GAIN : 

Enables you to set the current 

color temperature manually.

BRIGHTNESS

 : Select a brightness level in 

switching from setting in DAY mode to setting in 
NIGHT mode.



–

–

–

•

•

•

•

•

–

–

–

–

DIGITAL ZOOM 

[ON/OFF]

You can set the digital zoom factor and position. 
If you press the 

SETUP

 switch with the 

DIGITAL 

ZOOM

 function set to 

ON

, you will see the 

appropriate screen.

When the zoom factor and position are defi ned, the 
digital zoom function will operate.

DIGITAL ZOOM

RATIO [X1.0]
<LOCATION>

- 

 LOCATION

 : If you press the 

SETUP

 switch in the 

condition where the image is enlarged as much as 
the ratio setting, you can watch an invisible area of 
the effective screen as well using the 

cdef

switch.

Note :

If the digital zoom factor is set to larger than 1x, the FENCE 
function will be deactivated.

The DIGITAL ZOOM function enlarges the pixel itself, which 
can cause deterioration of the quality.

❖



–

–

DETAIL

 [0~3]

Controls the horizontal or vertical distinction.

V-SYNC  

[INT, 

LINE]

Select the vertical sync mode for 

INT

 or 

LINE

.

If you select 

INT

, the camera will use the internal 

synchronization.

If selecting 

LINE

, the camera will use the external 

power source frequency for the synchronization.

You can adjust the 

LL-PHASE

.

AGC COLOR SUP 

[LOW , MID, HIGH]

Adjust the color scheme according to the 

AGC

value.

REVERSE 

[OFF, H, V, H/V]

Mirrors video signals horizontally, vertically, or both. 

POSI/NEGA  

[+, -]

Output as it is or mirror the video brightness signal.

PIP  

[OFF, 

ON]

Displays a sub image together with the main image 
on the same screen using the Picture In Picture 
function.

❖

❖

❖

❖

❖

❖

Note :

If more than one privacy zone is set and the PRIVACY SET is 
set to ON, the PIP function will be deactivated.

If the INTELLIGENCE function is set to FENCE mode, the PIP 
menu will be deactivated.

DIS  

[OFF, 

ON]

Digital Image Stabilization will set the anti-shake 
compensation.

Note :

If you set DIS to ON, the compensation area will be enlarged 
as set in the digital zoom factor.
If you set the digital zoom factor to greater than the enlarged 
zoom factor for the compensation, the DIS function will be 
deactivated.



–

–

❖



–