background image

10

 – 

High Resolution Compact ATM Camera

  

11

Introduction

Introduction

Features

High Resolution

This camera has realized high resolution of 600 lines using the top-notch full digital image processing and 
special algorithm technologies.

VPS(Virtual Progressive Scan)

This is an advanced technology that reproduces a sharp progressive image. This is appropriate to high quality 
recording and fi le transfer via the Internet. (  For SCB-2020, the VPS option is not available.)

Intelligent Motion Detection & Tracking

This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it 
sounds an alert if an object passes / enters /exits the virtual fence or virtual area.

WDR

WDR extends the contrast range as it takes a picture of each of dark and bright areas before compositing the 
two, which is useful if you take a picture of windows inside a building. Namely, it improves the picture quality 
of the outdoor scenery as well as indoor. (  For SCB-2020, the WDR mode is not available.)

XDR (eXtended Dynamic Range)

Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain 
pixel unit to determine the optimal visibility.

High Sensitivity

Adopted SONY Super-HAD PS CCD (SCB-3020)/Super-HAD IT CCD (SCB-2020) which enables super sensitive video 
acquisition.

Low Illumination

Low illumination feature enabled by the digital signal processing technology that allows recording in a lowest illumination where 
nearly no light is received.

Superior Backlight Adjustment

When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded 
object picture quality.

Digital Power Synchronization

The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the 
operationability and reliability of this camera.

Random Trigger Function

Recording video while synchronized to a random trigger signal is available. (This feature is not supported by 
SCB-2020.)

Output Signal Setting

You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy, 
Horizontal/Vertical profi ling, and digital zooming.

Coaxial Cable Communication

This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the control 
signal. In installation or repair, this helps you control the communication controller (optional) without additional cabling.

Main Product

PRODUCT & ACCESSORIES

Product & Accessories

Accessories

High Resolution Compact 
ATM Camera

User Manual

SCB-3020
SCB-2020

User Manual

Screw (2EA)

8PIN Connector

Cable Tie (1EA)

Summary of Contents for SCB-3020
























Reviews: