33
CCa
allll FFu
un
nccttiio
on
nss
32
CCa
allll FFu
un
nccttiio
on
nss
3. Press
or
to enter the desired pause.
• Press
for
P pause
. The letter “P” displays
in the number, meaning that a hard pause will
occur at that point in the dialing sequence.
• Press
for
T pause
. The letter “T”
displays in the number, meaning that a “Timed”
pause will occur at that point in the dialing
sequence.
4. Enter the digits that need to follow the pause
(such as your account number).
5. Store the number in your Phonebook as you
normally would by pressing and following the
screen prompts.
Pause Dialing from a Stored Phonebook Entry
1. Dial the number from the Phonebook.
2. If you stored the number using a two second
pause(s), your phone transmits the number that
follows the “T” pause two seconds after
connection.
If you stored the number using a hard pause(s),
wait for the appropriate prompt from the number
you are calling (credit card number, back account
number, etc.). When prompted, press
to send
the DTMF number that follows your hard pause.
3. “SENDING DTMF” flashes on the display and the
transmitted tone sounds.
Manual Pause Dialing
You can enter pauses manually using the Dial
options during the dialing process.
1. Enter the phone number of the service you want to
call (such as a bank’s teleservice phone number).
2. Press
to display the Dial options.
3. Press
for
P Pause
. The phone displays a
“P” meaning a hard pause. Enter the number to be
sent after the pause and then press
. After
connecting, press
again to transmit the
additional number.
Press for
T Pause
. The phone displays “T”
meaning a timed pause. When prompted, enter
the number to be sent after the pause and then
press
. The phone transmit the number that
follows the pause two seconds after connection.
