35
CCa
allll FFu
un
nccttiio
on
nss
34
CCa
allll FFu
un
nccttiio
on
nss
Voice Dialing
Before using the Voice dialing feature, you must
record the name and number in your phone using the
Voice Dial
menu. For further details, see page xx.
1. To place a call, press and hold , or open the
phone, depending on the
Set Active
menu option
(
7-3
). See page xx.
2. At the voice prompt, say the name into the
microphone.
• If the phone recognizes the name, the phone
attempts a connection.
• If the phone does not recognize the name, the
screen prompts for the name again.
• If the phone is unable to recognize the name
after three attempts, the message
Did not
match any voicetag try again
is displayed.
Try the call again later, or check the recorded
name.
3. The phone dials the corresponding number.
Adjusting the Volume
During a call, if you want to adjust the voice volume,
use the volume keys on the left side of the phone.
Press to increase and to decrease the
volume. The illustration on the display shows all
eight levels (the more bars, the louder). No bars
indicates the key beep is turned off.
In Standby mode, you can adjust the ringer volume
for calls using these keys.
