Basic copying
61
2. Menu Overview and Basic Setup
To scale the copy by directly entering the scale rate
1
If your machine has a
(copy) button on the control panel, Press the
(copy) button.
2
Select (
Menu
) >
Copy Feature
>
Reduce/Enlarge
>
Custom
on the
control panel.
3
Enter the copy size you want using the numeric keypad.
4
Press
OK
to save the selection.
5
Press (
Stop/Clear
) to return to ready mode.
When you make a reduced copy, black lines may appear at the bottom of
your copy.
18
ID card copying
Your machine can print 2-sided originals on one sheet.
The machine prints one side of the original on the upper half of the paper and
the other side on the lower half without reducing the size of the original. This
feature is helpful for copying a small-sized item such as business card.
•
The original must be placed on the scanner glass to use this feature.
•
If the machine set to Eco mode, this feature is not available.
Depending on the model, the operating procedure may differ.
1
Press
ID Copy
on the control panel.
2
Place the front side of an original facing down on the scanner glass
where arrows indicate as shown. Then, close the scanner lid.
Summary of Contents for SCX-4021S Series
