Samsung SCX-4520 User Manual Download

Page: 55 / 322

ETTING

TARTED

2.22

Press the scroll button ( or ) to scroll through the
options. Press

Enter

when you see the desired sound

option.

Press the scroll button ( or ) to display the desired status
or volume for the option you have selected.

You will see the selection on the bottom line of the display.

For the ringer volume, you can select “Off,” “Low,” “Mid,”

and “High.” Setting “Off” means that the ringer does not

sound. The machine works normally even if the ringer is

turned off.

Press

Enter

to save the selection. The next sound option

appears.

If necessary, repeat steps 2 through 4.

To return to Standby mode, press

Stop/Clear

Speaker Volume

Press

On Hook Dial

. A dial tone sounds from the speaker.

Press the scroll button ( or ) until you hear the volume
you want. The display shows the current volume level.

Press

On Hook Dial

to save the change and return to

Standby mode.

OTE

: You can adjust the speaker volume only when the

telephone line is connected.

Summary of Contents for SCX-4520



































































































































































































































































































































Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands

Samsung SCX-4520, User Manual

Search results

Summary of Contents for SCX-4520

Reviews:

Related manuals for SCX-4520

Brands by name

Popular brands