Samsung SCX-483 Series Service Manual Download

Page: 138 / 215

4. Alignment and Troubleshooting

Service Manual
SCX-483x/5x3x series

4-58

Samsung Electronics

8) Background

Description : Light dark background appears in whole area of the printing.

3. Has the life span of the

Toner cartridge ended?

4. Is the movement(Up and Down)

of the transfer roller smooth?

5. Is the HVPS normal?

2. Does recycle paper be used?

1. Does character exist less than

2% per a page, and hasn’t it been

used long time?

The toner cartridge is basically

designed to print 2,000 sheets

with 5% image.

Replace the toner cartridge when

the life span of it has been ended.

The A/S is not guaranteed if using

recycle paper.

If the problem is still not solved,

replace the toner cartridge.

Clean the bushing part of the

transfer roller.

Summary of Contents for SCX-483 Series
























































































































































































































Search results

Summary of Contents for SCX-483 Series

Reviews:

Related manuals for SCX-483 Series

Brands by name

Popular brands

Samsung SCX-483 Series, Service Manual

Search results

Summary of Contents for SCX-483 Series

Reviews:

Related manuals for SCX-483 Series

Brands by name

Popular brands