manualshive.com logo in svg

Samsung SCX-483 Series, Service Manual

The Samsung SCX-483 Series is a high-performance multifunction printer designed for productivity and convenience. With its sleek design and advanced features, this product offers exceptional performance. Enhance your printing experience by accessing the Service Manual, available for free download at 88.208.23.73:8080, providing comprehensive instructions and guidance.

Share
Download
background image

1. Precautions

Service Manual
SCX-483x/5x3x series

1-2

Samsung Electronics

1.2 Caution for safety

1.2.1 Toxic material

This product contains toxic materials that could cause illness if ingested.

(1)  If the LCD control panel is damaged it is possible for the liquid inside to leak. This liquid is toxic. Contact 

with the skin should be avoided, wash any splashes from eyes or skin immediately and contact your 
doctor. If the liquid gets into the mouth or is swallowed see a doctor immediately.

(2)  Please keep Drum cartridge and Toner Cartridge away from children. The toner powder contained in the 

Drum cartridge and Toner Cartridge may be harmful and if swallowed you should contact a doctor.

1.2.2 Electric Shock and Fire Safety Precautions

Failure to follow the following instructions could cause electric shock or potentially cause a   re.

(1)  Use only the correct voltage, failure to do so could damage the printer and potentially cause a   re or 

electric shock.

(2)  Use only the power cable supplied with the printer. Use of an incorrectly speci  ed cable could cause the 

cable to overheat and potentially cause a   re.

(3)  Do not overload the power socket, this could lead to overheating of the cables inside the wall and could 

lead to a   re.

(4)  Do not allow water or other liquids to spill into the printer, this can cause electric shock. Do not allow 

paper clips, pins or other foreign objects to fall into the printer these could cause a short circuit leading to 
an electric shock or   re hazard.

(5)  Never touch the plugs on either end of the power cable with wet hands, this can cause electric shock. 

When servicing the printer remove the power plug from the wall socket.

(6)  Use caution when inserting or removing the power connector. The power connector must be inserted 

completely otherwise a poor contact could cause overheating possibly leading to a   re. When removing 
the power connector grip it   rmly and pull.

(7)  Take care of the power cable. Do not allow it to become twisted, bent sharply round corners or other 

wise damaged. Do not place objects on top of the power cable. If the power cable is damaged it could 
overheat and cause a   re or exposed cables could cause an electric shock. Replace a damaged power 
cable immediately, do not reuse or repair the damaged cable. Some chemicals can attack the coating on 
the power cable, weakening the cover or exposing cables causing   re and shock risks.

(8)  Ensure that the power sockets and plugs are not cracked or broken in any way. Any such defects should 

be repaired immediately. Take care not to cut or damage the power cable or plugs when moving the 
machine.

(9)  Use caution during thunder or lightening storms. Samsung recommend that this machine be disconnected 

from the power source when such weather conditions are expected. Do not touch the machine or the 
power cord if it is still connected to the wall socket in these weather conditions.

(10)  Avoid damp or dusty areas, install the printer in a clean well ventilated location. Do not position the 

machine near a humidi  er. Damp and dust build up inside the machine can lead to overheating and 
cause a   re.

(11)  Do not position the printer in direct sunlight. This will cause the temperature inside the printer to rise 

possibly leading to the printer failing to work properly and in extreme conditions could lead to a   re.

(12)  Do not insert any metal objects into the machine through the ventilator fan or other part of the casing, it 

could make contact with a high voltage conductor inside the machine and cause an electric shock.

Summary of Contents for SCX-483 Series
























































































































































































































Reviews:

No comments

Related manuals for SCX-483 Series

Xerox AS/400 Installation And Setup Manual preview
AS/400
Brand: Xerox Pages: 23
IBM 6400 Series Operator'S Manual preview
6400 Series
Brand: IBM Pages: 113
IBM 6400 Series Owner'S Manual preview
6400 Series
Brand: IBM Pages: 16
IBM 6400 Series User Manual preview
6400 Series
Brand: IBM Pages: 214
Lexmark X295 Service Manual preview
X295
Brand: Lexmark Pages: 500
Xerox 82xx User Manual preview
82xx
Brand: Xerox Pages: 44
Printronix P7000 H-Series Brochure & Specs preview
P7000 H-Series
Brand: Printronix Pages: 9
Olivetti PGL 12EN Operator'S Manual preview
PGL 12EN
Brand: Olivetti Pages: 139
Oki MPS730b Manual De L'Utilisateur preview
MPS730b
Brand: Oki Pages: 143
Sagem MF 5482 Instruction Booklet preview
MF 5482
Brand: Sagem Pages: 102
AstroJet IB-9000-6P Operator'S Manual preview
IB-9000-6P
Brand: AstroJet Pages: 32
Xerox 7760DX - Phaser Color Laser Printer Brochure & Specs preview
7760DX - Phaser Color Laser Printer
Brand: Xerox Pages: 4
Ricoh SP 311DN Installation Manual preview
SP 311DN
Brand: Ricoh Pages: 2
SPRT SP-POS8VI User Manual preview
SP-POS8VI
Brand: SPRT Pages: 21
Lexmark C500N Service Manual preview
C500N
Brand: Lexmark Pages: 60
Kyocera ECOSYS M2135dn Operation Manual preview
ECOSYS M2135dn
Brand: Kyocera Pages: 410
WOOSIM PORTI-P440 Operator'S Manual preview
PORTI-P440
Brand: WOOSIM Pages: 19
SATO GT 424e Parts List preview
GT 424e
Brand: SATO Pages: 46

Brands by name

Popular brands

Load more brands