4. Alignment and Troubleshooting
4-13
Samsung Electronics
Service Manual
SCX-483x/5x3x series
In the exit area
1. Open and close the front cover. The jammed
paper is automatically ejected from the machine.
If you do not see the jammed paper, go to the
next step.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is
any resistance when you pull, stop and go to the
next step.
3. Open the rear cover.
4. Remove the jammed paper as shown in the
following gure.
5. Close the rear cover. Printing automatically
resumes.
In the duplex unit area
1. Pull the duplex unit out of the machine.
2. Remove the jammed paper from the duplex unit.
If the paper does not come out with the duplex unit,
remove the paper from the bottom of the machine.
If you still do not see the paper, go to the next step.
3
3
