Introduction
_ 17
CONTROL PANEL OVERVIEW
1
ID Copy
You can copy both sides of the ID Card like a
driver’s license to a single side of paper. See
page 36.
2
Reduce/Enlarge
Makes a copy smaller or larger than the original.
3
Display
Shows the current status and prompts during an
operation.
4
Status
Shows the status of your machine. See page 18.
5
Fax
Activates Fax mode.
6
Copy
Activates Copy mode.
7
Scan
Activates Scan mode.
8
Menu
Enters Menu mode and scrolls through the
available menus.
9
Left/right arrow
Scroll through the options available in the
selected menu, and increase or decrease values.
10
OK
Confirms the selection on the screen.
11
Back
Sends you back to the upper menu level.
12
Number keypad
Dials a number or enters alphanumeric
characters. See page 26.
13
Address Book
Allows you to store frequently used fax numbers
in memory or search for stored fax numbers or
email addresses.
14
Redial/Pause
In ready mode, redials the last number, or in Edit
mode, inserts a pause into a fax number.
15
On Hook Dial
Engages the telephone line.
16
Stop/Clear
Stops an operation at any time. In ready mode,
clears/cancels the copy options, such as the
darkness, the document type setting, the copy
size, and the number of copies.
17
Start
Starts a job.
• All illustrations on this user’s guide may differ from your machine
depending on its options or models.
• The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.