Troubleshooting
_ 56
troubleshooting
This chapter gives helpful information for what to do if you encounter an error.
This chapter includes:
• Tips for avoiding paper jams
• Understanding display messages
TIPS FOR AVOIDING PAPER JAMS
By selecting the correct media types, most paper jams can be avoided.
When a paper jam occurs, follow the steps outlined on page 56.
• Follow the procedures on page 32. Ensure that the adjustable guides
are positioned correctly.
• Do not overload the tray. Ensure that the paper level is below the paper
capacity mark on the inside of the tray.
• Do not remove paper from the tray while your machine is printing.
• Flex, fan, and straighten paper before loading.
• Do not use creased, damp, or highly curled paper.
• Do not mix paper types in a tray.
• Use only recommended print media. (See "Setting the paper size and
• Ensure that the recommended side of the print media is facing down in
the tray, or facing up in the manual tray.
CLEARING DOCUMENT JAMS
When an original jams while passing through the ADF,
Document Jam
appears on the display.
Input Misfeed
1.
Remove any remaining pages from the ADF.
2.
Open the ADF cover.
3.
Rotate the bushing on the right end of the ADF roller toward the ADF (
1
)
and remove the roller from the slot (
2
). Pull the document gently to the
left and out of the ADF.
4.
Align the left end of the ADF roller with the slot and push the right end of
the ADF roller into the right slot (
1
). Rotate the bushing on the right end
of the roller toward the document input tray (
2
).
5.
Close the ADF cover. Then load the removed page(s), if any, back into
the ADF.
1
ADF cover
This illustration may differ from your machine depending on its
model.
To prevent document jams, use the scanner glass for thick, thin, or
mixed paper-type originals.