E
nglish
3
Setting up
The following steps guide you on how to install this kit in your machine.
Note:
The figures and steps may differ depending on the particular machine. However,
the installation procedures are basically the same and applied to most machines.
1
Turn off your machine.
2
Disconnect all cables from your machine, including the power cord.
3
Detach the dummy panel which is on your machine, using a strong stick-like tool, such
as a screwdriver. Refer to your machine’s user's guide to determine where the dummy
panel or part for the kit is on your machine.
4
Align and slide the kit firmly into the machine.
SCX-FAX10x-QSG.book Page 3 Thursday, January 24, 2008 9:44 AM