background image

Thank you for purchasing a 

SAMSUNG CCD CAMERA.

 

Before operating the camera, confirm the camera model and proper input 
power voltage. In order to that you can understand this manual thoroughly, 
we'll introduce our model description.

SDC-415 SERIES 

  • NTSC MODELS 

• PAL MODELS

    SDC-415ND 

  SDC-415PD 

    SDC-415NA  

  SDC-415PA

     

  SDC-415PH

MODEL DESCRIPTION 

  • SDC-415X X
                      

_ _

  • SIGNAL SYSTEM
    N  --> NTSC MODEL
    P  --> PAL MODEL
   
  • POWER SOURCE
    D  --> DC 12V 
    A  --> AC 24V~
    H  --> AC 230V~

POWER SOURCE

SIGNAL SYSTEM

This installation should be made by a qualified service person and 

should conform to all local codes.

The lightning flash with an arrowhead symbol, within an equilateral triangle is 
intended to alert the user to the presence of uninsulated “dangerous voltage” 
within the product's enclosure that may be of sufficient magnitude to constitute 
a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user 
to the presence of important operating and maintenance (servicing) instructions 
in the literature accompanying the appliance.

INFORMATION -

This equipment has been tested and found to comply with 

limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These 
limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, 
if not installed and used in accordance with the instruction manual, may 
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference 
at his own expense.

WARNING -

Changes  or  modifications  not  expressly  approved  by  the 

manufacturer could void the user’s authority to operate the equipment.

WARNING  : 

To prevent electric shock and risk of fire hazards:

 Do NOT use power sources other than that specified.

 Do NOT expose this appliance to rain or moisture.

Summary of Contents for SDC-415 Series

















Reviews: